ece-4275-final
pyshrekek
Final Project for ECE 4275: Microelectronic Systems
Components (43)
| Reference | Value | Description |
|---|---|---|
| Q1-Q8 | BSZ150N10LS3-G | 18A Id, 100V Vds, OptiMOS N-Channel Power MOSFET, 44.0mOhm Ron, Qg (typ) 8.1nC, PG-TDSON-8 |
| Q9-Q11 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U3 | TMC5160A-TA | 20A Driver for two-phase bipolar stepper motor, SPI, UART, TQFP-48 |
| U4 | LMR36015ARNXR | |
| U5 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| BOOT1,EN1 | SW_Omron_B3FS | Omron B3FS 6x6mm single pole normally-open tactile switch |
| C1 | 10uF | Unpolarized capacitor |
| C2,C19,C20,CBOOT1 | 0.1uF | Unpolarized capacitor |
| C3,C8-C10,C22-C24 | 100nF | Unpolarized capacitor |
| C4,C5 | 2.2uF | Unpolarized capacitor |
| C6,C11,C16 | 470nF | Unpolarized capacitor |
| C7 | 22n, 100V | Unpolarized capacitor |
| C12-C15,CHF1,CHF2 | 220nF | Unpolarized capacitor |
| C17 | 1uF | Unpolarized capacitor |
| C18,Cin1 | 4.7uF | Unpolarized capacitor |
| CFF1 | 20uF | Unpolarized capacitor |
| C_E1 | C_Polarized | Polarized capacitor |
| J1 | LED_CONN_1 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | LED_CONN_0 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | TX_RX | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | GPIO_38_48 | Generic connector, single row, 01x09, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J6 | STEPPER_1_JST_XH | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J14 | LIMIT_0 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J15 | LIMIT_1 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J16 | LIMIT_2 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JFAN0-JFAN2 | FAN | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 15uH | Inductor |
| POWER_LED1 | LED | Light emitting diode |
| R1,R3,R22,R23,RFBB1 | 10k | Resistor |
| R2,R21 | 330 | Resistor |
| R4,R5 | 5.1k | Resistor |
| R6 | 2.2 | Resistor |
| R7-R10,R16,R17,R19,R20 | 22 | Resistor |
| R11-R14 | 47 | Resistor |
| R15,R18 | 100m | Resistor |
| R24 | 680 | Resistor |
| RFBT1 | 52.3k | Resistor |
| THERM1 | THERM1 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| THERM2 | THERM2 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |