PCB_Kicad
reivax-boucoi
Repo for all my home projects involving PCBs developped with Kicad
Components (22)
| Reference | Value | Description |
|---|---|---|
| U1 | MPL3115A2 | I2C precision pressure sensor with altimetry, LGA-8 |
| U2 | NRF24L01_Breakout | Ultra low power 2.4GHz RF Transceiver, Carrier PCB |
| U3 | ATtiny1634-S | 12MHz, 16kB Flash, 1kB SRAM, 256B EEPROM, ADC, ACI, debugWIRE, SOIC-20 |
| U4 | MCP1711 | 150mA low dropout linear regulator, fixed 3.3V output, SOT-23-5 |
| U5 | TP4056 | |
| BT1 | 18650 | Single-cell battery |
| C1-C3,C5,C10-C13,C15 | 100n | Unpolarized capacitor |
| C4,C6-C9,C14 | 10u | Polarized capacitor |
| D1 | LED_Dual_AAKK | Dual LED, cathodes on pins 3 and 4 |
| FB1 | FerriteBead | Ferrite bead |
| J1 | UART | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | AVR-ICSP-TagConnect | Atmel 6-pin ISP connector |
| J3 | I2C | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP1 | DAT | Jumper, 2-pole, closed/bridged |
| JP2 | CLK | Jumper, 2-pole, closed/bridged |
| JP3 | NRF_pwr | Jumper, 2-pole, closed/bridged |
| JP4 | MPL_pwr | Jumper, 2-pole, closed/bridged |
| JP5 | MCU_pwr | Jumper, 2-pole, closed/bridged |
| R1-R3 | 10k | Resistor |
| R4,R6,R7 | 1M | Resistor |
| R5,R8 | 1k | Resistor |
| SW1 | UserSW | Push button switch, generic, symbol, four pins |