| U1 | TVS-SMDB03CE3 | |
|---|
| U2 | ESP32-S3-WROVER | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
|---|
| U3 | XT60PM-F | |
|---|
| U4 | XT60PW-M | |
|---|
| U5 | LDO-TLV74033PDBVR | LDO Fixed output 3.3V. Input range: 3.7V-5.5V. 300mA |
|---|
| U6,U7 | SN65HVD232 | CAN Transceiver |
|---|
| U8 | LDO-LM7805MPX/NOPB | 7.5V-35V To 5V LDO. 1.5A |
|---|
| C1,C3,C4,C6,C7,C9,C11,C14 | 100nF | Unpolarized capacitor |
|---|
| C2 | 22uF | Unpolarized capacitor |
|---|
| C5 | 1uF | Unpolarized capacitor |
|---|
| C8,C10,C12,C13,C15,C16 | 10uF | Unpolarized capacitor |
|---|
| D1 | G | Light emitting diode |
|---|
| D2,D3,D5 | B | Light emitting diode |
|---|
| D4 | 40V | Schottky diode |
|---|
| F1 | FuseHolder | Fuseholder through hole, 30A max |
|---|
| G1,G6 | PHR-3 | |
|---|
| G3 | JUMPER 2PINS (QPC02SXGN-RC) | |
|---|
| G4 | PHR-2 | |
|---|
| G8 | PHR-6 | |
|---|
| J1 | USB_C_USB4105-GF-A | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J2 | XT30PW-F | |
|---|
| J3,J4 | Eth-Horiz | RJ connector, 8P8C (8 positions 8 connected), RJ31/RJ32/RJ33/RJ34/RJ35/RJ41/RJ45/RJ49/RJ61 |
|---|
| J5,J8 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J9 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J10 | Jumper PWR | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| R1,R2,R4-R6,R11 | 5.1k | Resistor |
|---|
| R3,R7,R8 | 10k | Resistor |
|---|
| R10 | 120 | Resistor |
|---|
| SW1-SW4 | SW-PTS815SJM250SMTRLFS | Push button switch |
|---|
