robosub-ee
ryos17
Stanford Robosub Electrical Repository
Components (30)
| Reference | Value | Description |
|---|---|---|
| U1 | BA033CC0FP-E2 | |
| U2,U3 | MCP9808_MSOP | +/-0.25C (+/-0.5C) Typical (Maximum), Digital Temperature Sensor, MSOP-8 |
| U4 | BME280 | 3-in-1 sensor, humidity, pressure, temperature, I2C and SPI interface, 1.71-3.6V, LGA-8 |
| U6 | Teensy4.1 | |
| U7 | MCP23008-E_P | |
| C1,C3,C6 | 10uF | Unpolarized capacitor |
| C2 | 0.1uF | Unpolarized capacitor |
| C4,C5 | 135p | Unpolarized capacitor |
| C7 | 1uF | Unpolarized capacitor |
| D1 | 1N5817 | Diode |
| D2,D3 | LED | Light emitting diode |
| J2,J4,J11,J17-J19 | 430450422 | |
| J3 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| J5 | 430451027 | |
| J6,J20-J23,J25 | 430450228 | |
| J7,J13 | SBH11-PBPC-D10-ST-BK | |
| J8 | Conn_02x22_Odd_Even | Generic connector, double row, 02x22, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | J1B1211CCD | Modules Accessories RJ-45 w/ Transformer Connector /CETUS |
| J10 | Conn_02x03_Odd_Even | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | PixHawk PM02 | |
| J14,J31 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
| J26 | 430450821 | |
| J28 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| JP3,JP4,JP7,JP11-JP16,JP18-JP31,JP41-JP44,JP49-JP53,JP57,JP59,JP60,JP67 | Jumper_2_Small_Open | Jumper, 2-pole, small symbol, open |
| JP5,JP6,JP32-JP39,JP45-JP48 | Jumper_2_Small_Bridged | Jumper, 2-pole, small symbol, bridged |
| LED1-LED36 | 1655 | |
| R1-R5,R8,R9 | 10k | Resistor, US symbol |
| R6,R7 | 140 | Resistor, US symbol |
| RN1 | 10kΩ | 10k Ohm ±5% 62.5mW Power Per Element Isolated 4 Resistor Network/Array ±200ppm/°C 1206 (3216 Metric), Convex, Long Side Terminals |
| SW1 | 09.03201.02 |