Loading design…
ryos17
Stanford Robosub Electrical Repository
| Reference | Value | Description |
|---|---|---|
| Q1-Q6 | MCTL160N15Y-TP | |
| Q7 | L78M05ABDT-TR | |
| U1,U2,U13 | STPS5045SG-TR | |
| U3 | LTC1255CS8-PBF | High side gate driver |
| U4 | BA033CC0FP-E2 | |
| U5,U17 | ACS758LCB-100U-PFF-T | |
| U6,U8-U10 | SN74HC132PWR |
| U7 | 74VHC21FT | 2CH 4input AND gate |
|---|
| U11 | SN74LVC1G373DCKR |
|---|
| U12 | MCP6564-E/ST | https://www.digikey.com/en/products/detail/microchip-technology/MCP6564-E-ST/1680926 |
|---|
| U14,U16 | MCP9808_MSOP | +/-0.25C (+/-0.5C) Typical (Maximum), Digital Temperature Sensor, MSOP-8 |
|---|
| U15 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
|---|
| U18 | SRT60L100DC-R | C5292066 |
|---|
| 1A1,1B1,1Y1,2A2,2B2,2Y1,3A2,3B2,3Y1,4A1,4B1,4Y1,TP2-TP6 | TestPoint | test point |
|---|
| C1-C5,C12,C13,C15,C19 | 10uF | Polarized capacitor,Unpolarized capacitor |
|---|
| C6,C14,C20 | 1uF | Unpolarized capacitor |
|---|
| C7 | 0.1u | Unpolarized capacitor |
|---|
| C8,C17 | 100nF | Unpolarized capacitor |
|---|
| C9,C18 | 1µF | Unpolarized capacitor |
|---|
| C10,C11 | 10,000uF | Polarized capacitor |
|---|
| C16 | 0.1uF | Unpolarized capacitor |
|---|
| CR1 | SBRT15U50SP5-13 |
|---|
| D1,D2 | D_Zener | Zener diode |
|---|
| D3 | TVS | Diode |
|---|
| D4-D14 | GreenLED | Green LED, Vf = 2.2 |
|---|
| D15,D16 | SS54 | Diode |
|---|
| H1-H4,H6-H9 | MountingHole |
|---|
| J1,J2,J5,J6,J11-J13,J16,J21,J22 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
|---|
| J3,J4,J14,J15 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J7 | USB_A_Stacked | USB Type A connector, stacked |
|---|
| J8 | SBH11-PBPC-D10-ST-BK |
|---|
| J9 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
|---|
| J10,J19,J20 | via | Generic connector, single row, 01x01, script generated |
|---|
| J17 | FPGA MOUNT | Generic connector, double row, 02x02, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J18 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
|---|
| JP10,JP11,JP13-JP20,JP25,JP27 | Jumper_2_Bridged | Jumper, 2-pole, closed/bridged |
|---|
| JP12,JP21,JP23,JP26 | Jumper_2_Open | Jumper, 2-pole, open |
|---|
| LED1-LED29 | 1655 |
|---|
| PM1,PM2 | LMS78 | 5V, 2A regulator |
|---|
| R1,R6 | 50k | Resistor, US symbol |
|---|
| R2,R3,R7,R8,R16,R27,R32,R34,R36,R41 | 10k | Resistor, US symbol |
|---|
| R4,R5 | 100k | Resistor, US symbol |
|---|
| R9,R10,R29,R30,R37-R39,R42-R45 | 0R | Resistor, US symbol |
|---|
| R11,R12,R17-R20,R22-R24 | 100 | Resistor, US symbol |
|---|
| R13 | 2.2k | Resistor, US symbol |
|---|
| R14 | 0.5 Ohm 25W | Resistor, US symbol |
|---|
| R15 | 3.9k | Resistor, US symbol |
|---|
| R21 | 100 Ohm | 100 Ohm x8 |
|---|
| R25 | 15k | Resistor, US symbol |
|---|
| R26 | 1.5k | Resistor, US symbol |
|---|
| R28 | 20k | Resistor, US symbol |
|---|
| R31,R33,R35 | 47k | Resistor, US symbol |
|---|
| S1 | 100SP1T1B4M2QE |
|---|
| TH1,TH2 | Thermistor_US | Thermistor, temperature dependent resistor, US symbol |
|---|
| TP1 | DiodeRegSupply | test point |
|---|
| VR1,VR2 | 3296W-1-103RLF | 10k Pot |
|---|