Loading design…
sandgum
A 24 inch Raspberry Pi-based Android digital picture frame attached to a 220W stereo Bluetooth speaker with DSP
| Reference | Value | Description |
|---|---|---|
| U1 | CM4102008 | Raspberry Pi Compute Module 4 with WiFi 2GB RAM 8GB Flash | Raspberry Pi CM4102008 |
| U2,U3,U7,U10 | TPD4E02B04DQA | 4-Channel ESD Protection Diode for USB Type-C and HDMI 2.0, USON-10 |
| U4 | ESP32-S3-WROOM-2 | RF Module, 2.4 GHz, Wi-Fi, Bluetooth, BLE, ESP32-S3R8V |
| U5,U14 | PCM5102A | 2.1 VRMS, 112dB Audio Stereo DAC with PLL and 32-bit, 384kHz PCM Interface, TSSOP-20 |
| U6 | RT9742SNGV | High-side power switch, 0.5 A, SOT-23 |
| U8,U9 | 74LVC1G07 | Single Buffer Gate, Open Drain, Low-Voltage CMOS |
| U11 | LP5907MFX-3.3 | 250-mA Ultra-Low-Noise Low-IQ LDO, 3.3V, SOT-23 |
|---|
| U12,U13,U15,U16,U24-U26 | TS5A3159AYZPR | Single SPDT Analog Switch, 1.65-V to 5.5-V Single-Supply Operation, 1Ohm Ron, DSBGA-6 |
|---|
| U17-U19 | TPA3116D2DAD | 50-W stereo, 100-W mono, 4.5- to 26-V supply, analog input Class-D audio amplifier w/ SpeakerGuard™ |
|---|
| U20,U21 | TPA3130D2DAPR | 50-W stereo, 100-W mono, 4.5- to 26-V supply, analog input Class-D audio amplifier w/ SpeakerGuard™ |
|---|
| U22 | MPU-6050 | InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C |
|---|
| U23 | BME680 | 4-in-1 sensor, gas, humidity, pressure, temperature, I2C and SPI interface, 1.71-3.6V, LGA-8 |
|---|
| U27 | TPS2041B | Single power-distribution switcher |
|---|
| C1,C4,C5,C7,C9,C14,C17,C19,C23,C26,C28,C31,C34,C37-C39,C42,C43,C45,C47,C50,C53,C72,C80,C81,C106,C109,C135,C138,C163,C166,C185,C186 | 100nF | Unpolarized capacitor |
|---|
| C2,C8,C12,C13,C44,C46,C48,C75-C77,C102,C103,C105,C131,C132,C134,C157-C160,C162,C188,C190 | 1uF | Unpolarized capacitor |
|---|
| C3,C15,C16,C18,C22,C25,C27,C32,C33,C40 | 10uF | Polarized capacitor |
|---|
| C6,C73 | 22uF | Polarized capacitor,Unpolarized capacitor |
|---|
| C10,C11,C35,C36,C71 | 2.2nF | Unpolarized capacitor |
|---|
| C20,C21,C29,C30 | 2.2uF | Unpolarized capacitor |
|---|
| C24,C63,C64,C69,C70,C96-C99,C123-C126,C153-C156,C181-C184 | 10nF | Unpolarized capacitor |
|---|
| C41 | 10uF (Tantalum) | Polarized capacitor |
|---|
| C49,C52,C61,C62,C67,C68,C79,C82,C92-C95,C107,C108,C119-C122,C127,C128,C136,C137,C140,C149-C152,C164,C165,C168,C177-C180 | 1nF | Unpolarized capacitor |
|---|
| C51,C54,C78,C83,C104,C110,C133,C139,C161,C167 | 220uF | Polarized capacitor |
|---|
| C55-C58,C84-C87,C111-C114,C141-C144,C169-C172 | 220nF | Unpolarized capacitor |
|---|
| C59,C60,C65,C66,C88-C91,C115-C118,C145-C148,C173-C176 | 680nF | Unpolarized capacitor |
|---|
| CR1 | SP3010-04UTG |
|---|
| D1 | SMAJ33CA | 400W bidirectional Transient Voltage Suppressor, 33.0Vr, SMA(DO-214AC) |
|---|
| D2,D5-D7 | WS2812B | RGB LED with integrated controller |
|---|
| D3,D4 | LED | Light emitting diode |
|---|
| J1 | SS-53200-001 |
|---|
| J2 | Barrel_Jack | DC Barrel Jack |
|---|
| J3 | UART | Generic connector, single row, 01x04, script generated |
|---|
| J4 | JTAG | Generic connector, single row, 01x04, script generated |
|---|
| J5 | SUBWOOFER_1 | Generic connector, single row, 01x02, script generated |
|---|
| J6 | SUBWOOFER_2 | Generic connector, single row, 01x02, script generated |
|---|
| J7 | SUBWOOFER_3 | Generic connector, single row, 01x02, script generated |
|---|
| J8 | SUBWOOFER_4 | Generic connector, single row, 01x02, script generated |
|---|
| J9 | SUBWOOFER_5 | Generic connector, single row, 01x02, script generated |
|---|
| J10 | SUBWOOFER_6 | Generic connector, single row, 01x02, script generated |
|---|
| J11 | TWEETER_1 | Generic connector, single row, 01x02, script generated |
|---|
| J12 | TWEETER_2 | Generic connector, single row, 01x02, script generated |
|---|
| J13 | TWEETER_3 | Generic connector, single row, 01x02, script generated |
|---|
| J14 | TWEETER_4 | Generic connector, single row, 01x02, script generated |
|---|
| J15,J16 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| L1-L12 | 10uH/10A | Inductor |
|---|
| L13-L20 | 10uH/3A | Inductor |
|---|
| R1,R2 | 2.2K | Resistor |
|---|
| R3,R7,R65,R66 | 5.1K | Resistor |
|---|
| R4,R12,R25,R44,R49,R59,R67-R71 | 10K | Resistor |
|---|
| R5,R6,R72,R73 | 1K | Resistor |
|---|
| R8-R11 | 470R | Resistor |
|---|
| R14 | 220R | Resistor |
|---|
| R15,R21-R24,R31-R34,R40-R43,R51-R54,R61-R64 | 3.3R | Resistor |
|---|
| R16-R18,R20,R26,R27,R30,R35,R36,R39,R45,R46,R50,R55,R56,R60 | 100K | Resistor |
|---|
| R19 | 20K | Resistor |
|---|
| R28,R37,R47,R57 | 47K | Resistor |
|---|
| R29,R38,R48,R58 | 75K | Resistor |
|---|
| SW1 | POWER | Push button switch, generic, two pins |
|---|
| SW2 | PI_BOOT | Push button switch, generic, two pins |
|---|
| SW3 | ESP_BOOT | Push button switch, generic, two pins |
|---|
| SW4 | ESP_RESET | Push button switch, generic, two pins |
|---|
| SW6 | SW_DPDT_x2 | Switch, dual pole double throw, separate symbols |
|---|
| VR1 | LM1085ISX-5.0_NOPB | 3-A, 29-V, linear voltage regulator |
|---|