STM32_Init
serega3453
Components (30)
| Reference | Value | Description |
|---|---|---|
| Q1 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| U1 | STM32F070F6Px | STMicroelectronics Arm Cortex-M0 MCU, 32KB flash, 6KB RAM, 48 MHz, 2.4-3.6V, 15 GPIO, TSSOP20 |
| U2 | MPU-6050 | InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C |
| U3 | TPS54302 | 3A, 4.5 to 28V Input, EMI Friendly integrated switch synchronous step-down regulator, pulse-skipping, SOT-23-6 |
| C1,C3,C4 | 100n | Unpolarized capacitor |
| C2 | 10n | Unpolarized capacitor |
| C5 | 2.2n | Unpolarized capacitor |
| C6,C8 | 0.1u | Unpolarized capacitor |
| C7,L1 | 10u | Inductor,Unpolarized capacitor |
| C9,C10 | 22u | Unpolarized capacitor |
| D1 | LED_RGB | RGB LED, 6 pin package |
| D2,TP5 | 3.3V | Zener diode,test point |
| J1 | SAFE MODE | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Contactor | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | FCU | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Power | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Load | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | AudioJack4_SwitchTR1 | Audio Jack, 4 Poles (Stereo / TRRS), Switched TR1 Poles (Normalling) |
| R1-R6,R9,R13,R17 | 10k | Resistor |
| R7,R8,R10 | 100 | Resistor |
| R11,R12 | 4.7k | Resistor |
| R14 | 20k | Resistor |
| R15 | 100k | Resistor |
| R16 | 22k | Resistor |
| SW1,SW4 | SW_DIP_x01 | 1x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| TP1 | TX | test point |
| TP2 | RX | test point |
| TP3 | SWCLK | test point |
| TP4 | SWDIO | test point |
| TP6 | GND | test point |