Open-FlipDisk
shashwtd
Components (25)
| Reference | Value | Description |
|---|---|---|
| U1 | AP63205WU-7 | |
| U2-U4 | 74HC595 | 8-bit serial in/out Shift Register 3-State Outputs |
| U5-U9 | TB6612FNG | Driver IC for Dual DC motor, SSOP-24 |
| A1 | RaspberryPi_Pico_W | Versatile and inexpensive wireless microcontroller module powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash, Infineon CYW43439 2.4GHz 802.11n wireless LAN; also supports Raspberry Pi Pico 2 W |
| C1 | 1000uF | Polarized capacitor |
| C2,C3 | 100uF | Polarized capacitor |
| C4 | 10uF | Unpolarized capacitor |
| C5,C19 | 22uF | Unpolarized capacitor |
| C6-C18 | 0.1uF | Unpolarized capacitor |
| C20 | 100nF | Unpolarized capacitor |
| D1 | SS34 | Schottky diode |
| D2 | SS14 | Schottky diode |
| D3 | D_PWR (green) | Light emitting diode |
| D4 | D_ACT (red) | Light emitting diode |
| F1 | Fuse T2A | Fuse |
| J1 | Barrel_Jack | DC Barrel Jack |
| J2,J3 | Screw_Terminal_01x05 | Generic screw terminal, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 4.7uH | Inductor |
| R1 | 10k | Resistor |
| R2,R3 | 330R | Resistor |
| SW1 | CLEAR | Push button switch, generic, two pins |
| SW2 | FUNC1 | Push button switch, generic, two pins |
| SW3 | FUNC2 | Push button switch, generic, two pins |
| SW4 | RESET | Push button switch, generic, two pins |