custom-ESP32
shyver
Components (38)
| Reference | Value | Description |
|---|---|---|
| Q1 | AO3401A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| Q2,Q3 | SS8050 | General Purpose NPN Transistor, 1.5A Ic, 25V Vce, SOT-23 |
| U1 | TPS56339DDC | 4.5V to 24V Input, 3-A Output Synchronous Buck Converter, SOT-23-6 |
| U2 | ESP32-WROOM-32E | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U3 | CP2102N-Axx-xQFN24 | USB to UART master bridge, QFN-24 |
| C1,C3,C4,C8-C10,C12 | 0.1µF | Unpolarized capacitor |
| C2,C5,Cin1 | 10µF | Unpolarized capacitor |
| C6,C7 | 22µF | Unpolarized capacitor |
| C11 | 4.7µ | Unpolarized capacitor |
| D1,D4,D5 | 5.0V TVS | Bidirectional transient-voltage-suppression diode |
| D2,D3 | LED | Light emitting diode |
| F1 | Polyfuse | Resettable fuse, polymeric positive temperature coefficient |
| J1 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J2 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| L1 | SRP5030CA-4R7M | Inductor |
| LEFT_GPIO1,RIGHT_GPIO1 | Conn_01x19_Pin | Generic connector, single row, 01x19, script generated |
| R1 | 30.0 | Resistor |
| R2,R3 | 5.1k | Resistor |
| R4 | 30.9k | Resistor |
| R5 | 10.0k | Resistor |
| R6-R11,R14,R15 | 10k | Resistor |
| R12,R13 | 47 | Resistor |
| R16,R17,R20 | 1k | Resistor |
| R18 | 22.1K | Resistor |
| R19 | 47.5K | Resistor |
| R21,R22 | 22 | Resistor |
| R23,R24 | 100k | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| TP1 | VIN | test point |
| TP2-TP4 | GND | test point |
| TP5 | SW | test point |
| TP6 | BST | test point |
| TP7 | 3V3 | test point |
| TP8 | VOUT | test point |
| TP9 | EN | test point |
| TP10 | IO0 | test point |
| TP11 | TX0 | test point |
| TP12 | RX0 | test point |