flight-computer
sigmondkukla
Components (43)
| Reference | Value | Description |
|---|---|---|
| Q1 | DMG2302UKQ | 2.8A Id, 20V Vds, N-Channel MOSFET, SOT-23 |
| U1 | STM32F446RETx | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 180 MHz, 1.8-3.6V, 50 GPIO, LQFP64 |
| U2 | BU33SD5 | Linear Voltage Regulator IC Positive Fixed 1 Output 500mA 5-SSOP |
| U3 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U4 | LPS22HH | MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, I3C, 0.65 Pa noise rms, ST_HLGA-10L |
| U5 | LIS2MDL | Ultra-low-power, 3-axis digital output magnetometer, LGA-12 |
| U6 | LSM6DSV80X | STMicroelectronics Dual Range Accelerometer, Gyroscope, 9 axis IMU, +-16g, +-80g, +-4000dps |
| U7 | Wio-SX1262 | RF TXRX Module LoRa ISM 22dBm (G)FSK |
| U9 | MAX-M10S | GNSS Module MAX M10, VCC 1.65V to 3.6V |
| U10 | LM66200 | OR Controller N+1 N-Channel 2:1 Texas Instruments TI 2.5A |
| U11 | BUK9K25-40RAX | Nexperia USA Mosfet Array 40V 18.2A 2 N Channel NMOS |
| U12 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| AE1 | APAE1575R1820ABDC1-T | Antenna |
| BZ1 | CMT-0904-83T | Buzzer, polarized |
| C1,C18,C33 | 10u | Unpolarized capacitor, small symbol |
| C2-C6,C8,C10,C15,C17,C20-C22,C24,C30-C32 | 100n | Unpolarized capacitor, small symbol |
| C7,C11,C12,C28,C29 | 1u | Unpolarized capacitor, small symbol |
| C9,C16,C27 | 4.7u | Unpolarized capacitor, small symbol |
| C13,C14 | 14p | Unpolarized capacitor, small symbol |
| C19 | 220n | Unpolarized capacitor, small symbol |
| D1 | B38G3RGB | RGB LED, red/green/blue/anode |
| D2 | BAT54T1G | Schottky diode, small symbol, filled shape |
| J1 | 3220-10-0100-00 | Cortex Debug Connector, standard ARM Cortex-M SWD and JTAG interface |
| J2,J3 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| J4 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J6 | MSD-4-A | Micro SD Card Socket with one card detection pin |
| J8 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J9,J10 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | Conn_01x04_Pin_P2.54mm | Generic connector, single row, 01x04, script generated |
| J12 | Conn_01x04_Qwiic | Qwiic I2C connector 4 pin |
| R1,R2,R25,R26,R29-R31,R36,R37 | 10k | Resistor, small US symbol |
| R3,R19 | 0 | Resistor, small US symbol |
| R4,R5 | 5.1k | Resistor, small US symbol |
| R6 | 33k | Resistor, small US symbol |
| R7 | 82k | Resistor, small US symbol |
| R17,R18,R21-R24,R38 | 22 | Resistor, small US symbol |
| R20 | DNP | Resistor, small US symbol |
| R27,R28,R35 | 100 | Resistor, small US symbol |
| R32 | 330 | Resistor, small US symbol |
| R33,R34 | 150 | Resistor, small US symbol |
| R39-R44 | 50k | Resistor, small US symbol |
| SW1,SW2 | PTS815 | Push button switch, generic, two pins |
| Y1 | ECS-160-12-33B2Q-JES-TR3 | Four pin crystal, GND on pins 2 and 4 |