daisy-studio
squeedee
Daisy Seed Carrier for Balanced Pro Audio
Components (54)
| Reference | Value | Description |
|---|---|---|
| Q1,Q4 | MMBT3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, SOT-23 |
| Q2,Q3 | MMBT3906 | -0.2A Ic, -40V Vce, Small Signal PNP Transistor, SOT-23 |
| Q5 | DMP3056L-13 | DMP3056L-13 |
| U1,U2 | THAT1646 | THAT1646 balanced line driver, transformer-like, SOIC-8 |
| U3,U6 | OPA1656ID | Dual Ultra-Low-Noise, Low-Distortion, FET-Input, Burr-Brown Audio Operational Amplifiers, SOIC-8 |
| U4,U5 | THAT1246 | THAT1246 balanced line receiver, unity gain, SOIC-8 |
| U7 | LM2903 | Low-Power, Low-Offset Voltage, Dual Comparators, DIP-8/SOIC-8/SOP-8/TSSOP-8/VSSOP-8 |
| U8 | H11L1 | Schmitt Trigger Output Optocoupler, High Speed, DIP-6, 1.6mA turn on threshold |
| U9 | Daisy_Seed | Daisy is an embedded platform for music. |
| U10 | TPS54302 | 3A, 4.5 to 28V Input, EMI Friendly integrated switch synchronous step-down regulator, pulse-skipping, SOT-23-6 |
| C1,C2,C5,C6,C10,C13,C14,C17,C19,C20,C23,C25,C26,C31,C35,C37,C42 | 100n | Unpolarized capacitor |
| C3,C4,C7,C11,C12,C18,C21,C28 | 10u | Unpolarized capacitor |
| C8,C15 | 100p C0G | Unpolarized capacitor |
| C9,C16,C22,C24 | 1n | Unpolarized capacitor |
| C27,C29,C30,C32 | 47u | Unpolarized capacitor |
| C33,C34 | 1n C0G | Unpolarized capacitor |
| C36 | 100u 25V | Polarized capacitor |
| C38 | 75pF | Unpolarized capacitor |
| C39 | 10u 25V | Unpolarized capacitor |
| C40,C41,C43,C44 | 22u 25V | Unpolarized capacitor |
| D1-D8 | SM4004 | 400V 1A General Purpose Rectifier Diode, MELF |
| D11 | 1N4148WS | 75V 0.15A Fast switching Diode, SOD-323 |
| D12-D14 | SMBJ15CA | Bidirectional transient-voltage-suppression diode |
| D15 | SMAJ5.0A | 400W unidirectional Transient Voltage Suppressor, 5.0Vr, SMA(DO-214AC) |
| J1,J2,J4,J6 | NCJ6FA-H-0 | Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, retention spring |
| J3 | Conn_02x10_Odd_Even | Generic connector, double row, 02x10, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7,J9,J10 | SDS-50J | 5 Pin, Right-Angle Receptacle, 180 |
| J8 | Conn_02x03 | Generic connector, single row, 01x06, script generated |
| J11 | Conn_02x14_Odd_Even | Generic connector, double row, 02x14, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | Conn_02x02_Odd_Even | Generic connector, single row, 01x04, script generated |
| J13 | Barrel_Jack_MountingPin | DC Barrel Jack with a mounting pin |
| J14 | Micro_SD_Card_Det2 | Micro SD Card Socket with two card detection pins |
| L1 | 10uH | Inductor |
| L2,L3 | BLM18PG121SN1 | Inductor |
| PS1 | RS3-1212D | 3 Watt DC/DC converter, industrial, 2:1 input, regulated, 1600 VDC I/O-isolation, encapsulated, SIP-8 |
| R1,R3 | 1k | Resistor |
| R2,R7 | 6.8k | Resistor |
| R4,R9 | 12k 1% | Resistor |
| R5,R6 | 2k2 1% | Resistor |
| R8,R16,R33,RV2,RV4 | 10k | Multi-Turn Trim-potentiometer,Resistor |
| R10,R11 | 3.3k 1% | Resistor |
| R12,R14,R15,R19 | 1.5k 1% | Resistor |
| R13,R17,R18,R20 | 10k 1% | Resistor |
| R21-R23 | 33R | Resistor |
| R24,R31 | 220R | Resistor |
| R25-R28,R32 | 47k | Resistor |
| R29 | 10R | Resistor |
| R30 | 270R | Resistor |
| R34,RV7,RV8 | 100k | Multi-Turn Trim-potentiometer,Resistor |
| R35 | 100k 1% | Resistor |
| R36 | 49.9R 1% | Resistor |
| R37 | 13.7k 1% | Resistor |
| R38 | 13.3K 1% | Resistor |
| SW1 | Power | Single Pole Single Throw (SPST) switch |