pcb
sufst
Monorepo for all schematics and PCB designs
Components (40)
| Reference | Value | Description |
|---|---|---|
| Q2 | DMP510DL-7 | P-MOSFET enchancement mode transistor, generic symbol, Alternate KiCAD Library |
| U1 | TCAN3404-Q1 | CAN Tranceiver 58V Tolerant |
| U2 | STM32F105RBTx | STMicroelectronics Arm Cortex-M3 MCU, 128KB flash, 64KB RAM, 72 MHz, 2.0-3.6V, 51 GPIO, LQFP64 |
| U3 | AP7375Q-33SF | Wide Vin, 3.3V, 300mA LDO |
| U4-U19 | TLV9101IDBVR | TLV910x 16-V, 1-MHz, Rail-to-Rail Input/Output, Low Power Op Amp |
| U20 | ISM330DHCX | iNEMO inertial module with embedded Machine Learning Core: always-on 3D accelerometer and 3D gyroscope with digital output for industrial applications, LGA-14 |
| U21 | MCP9800Ax-xOT | 2-Wire High-Accuracy Temperature Sensor, No Serial Bus time-out, SOT-23-5 |
| C1,C2 | 4.7p | |
| C3,C4,C27-C30 | 100n | |
| C5 | 4.7n | |
| C6,C9 | 1uF | Unpolarized capacitor |
| C7,C10 | 10uF | Unpolarized capacitor |
| C8 | 10u | |
| C11-C26 | 10nF | Unpolarized capacitor |
| C31 | 4.7u | |
| C60,C100 | 0.1uF | Unpolarized capacitor |
| D1 | NUP2105L | Dual Line CAN Bus Protector, 24Vrwm |
| D2 | BZT52B10 | Zener/avalanche diode; unidirectional breakdown diode; voltage regulator diode (IEEE filled) |
| D3,D20 | LED | |
| D4-D19 | BAT54S | Vr 30V, If 200mA, Dual schottky barrier diode, in series, SOT-323 |
| F1,F2 | 100mA | Fuse |
| F3 | 500mA | Fuse |
| FB1 | BLM18PG121SN1 | Ferrite bead |
| J1 | Conn_ARM_JTAG_SWD_10 | Cortex Debug Connector, standard ARM Cortex-M SWD and JTAG interface |
| J2 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J3 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Bottom_Left | Generic connector, double row, 02x06, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Top_Left | Generic connector, double row, 02x06, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Top_Right | Generic connector, double row, 02x06, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Bottom_Right | Generic connector, double row, 02x06, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R3,R6 | 100 | |
| R2,R7,R11,R14,R17,R20,R23,R26,R29,R32,R35,R38,R41,R44,R47,R50,R53,R56 | 10k | Resistor |
| R4,R5 | 60R | |
| R8 | 1.5k | |
| R9,R12,R15,R18,R21,R24,R27,R30,R33,R36,R39,R42,R45,R48,R51,R54 | 40k | |
| R10,R13,R16,R19,R22,R25,R28,R31,R34,R37,R40,R43,R46,R49,R52,R55 | NC | |
| R57,R58 | 2.2k | |
| R59 | 220 | |
| SW1 | RESET | Single Pole Single Throw (SPST) switch |
| Y1 | ECS-250-10-47Q-CES-TR |