Loading design…
sundevilmotorsports
PCB development repository
| Reference | Value | Description |
|---|---|---|
| IC1 | ESP32-S3-WROOM-1-N8R8 | WiFi Modules - 802.11 (Engineering Samples Only) SMD Module, ESP32-S3R8 with 8 MB Octal PSRAM Die, 8 MB Quad SPI flash, PCB Antenna |
| IC2 | CP2102N-A02-GQFN28 | SILICON LABS - CP2102N-A02-GQFN28 - USB TO UART BRIDGE, -40 TO 85DEG C |
| IC3 | TLP175A_TPL,E | MOSFET Output Optocouplers Trigger LED Current 1mA85dC3750 Vrms |
| IC4 | TPS2116DRLR | d |
| IC5 | MIC37100-3.3WS | LDO Voltage Regulators 1.0A Low Voltage uCap LDO Regulator |
| Q1,Q2 | MMBT2222LT1G | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U1 |
| Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U2 | SN65HVD230 | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
|---|
| C1,C4,C7-C9 | 1uF |
|---|
| C2,C12,C14 | 10uF |
|---|
| C3,C6,C11,C13 | 100nF |
|---|
| C5 | 4.7uF |
|---|
| C10 | 100uF |
|---|
| D1 | ESDCAN03-2BWY | ESD Suppressors / TVS Diodes Automotive dual-line Transil, Transient voltage suppressor (TVS) for CAN bus |
|---|
| J1 | ESP_USB | USB Micro Type B connector |
|---|
| LED1 | GREEN | Single Color LEDs |
|---|
| LED2 | 150060RS75000 | WURTH ELEKTRONIK - 150060RS75000 - LED, 0603, RED, 250MCD, 625NM |
|---|
| R1,R7,R8,R10,R11,R13 | 10k |
|---|
| R2 | 220 |
|---|
| R3,R4 | 27 |
|---|
| R5 | 22.1K |
|---|
| R6 | 47.5K |
|---|
| R9 | 1k |
|---|
| R12 | 120 |
|---|
| R14 | 68 |
|---|
| R15 | 0 |
|---|
| TP1 | ST_5V | test point |
|---|