Loading design…
sundevilmotorsports
PCB development repository
| Reference | Value | Description |
|---|---|---|
| IC1 | STM32H743VIT6 | ARM Microcontrollers - MCU High-performance and DSP with DP-FPU, ARM Cortex-M7 MCU with 2MBytes Flash, 1MB RAM, 400 MHz CPU, Art Accelerator, L1 cache, external memory interface, large set of peripherals |
| IC2 | 74LVC1G17SE-7 | DiodesZetex 74LVC1G17SE-7, Buffer, Push-Pull, Non-Inverting, 1.65 5.5 V, 5-Pin SOT-353 |
| IC3 | TLP175A_TPL,E | MOSFET Output Optocouplers Trigger LED Current 1mA85dC3750 Vrms |
| IC4 | SN65HVD230QDR | 3.3-V CAN Transceiver with Standby Mode |
| IC5 | TPS259250DRCR | 5V, 5A, 30m eFuse with Adjustable +/-15% Accurate Current Limit |
| IC6 |
| LDO Voltage Regulators 1.0A Low Voltage uCap LDO Regulator |
| IC7 | TPS2116DRLR | d |
|---|
| U1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
|---|
| C1,C4,C6-C10,C12,C14,C16,C21 | 100nF |
|---|
| C2,C3 | 6pF |
|---|
| C5,C15 | 2.2uF |
|---|
| C11,C13,C20,C43 | 1uF |
|---|
| C17,C18 | 10uF |
|---|
| C19 | 4.7uF |
|---|
| D1 | ESDCAN03-2BWY | ESD Suppressors / TVS Diodes Automotive dual-line Transil, Transient voltage suppressor (TVS) for CAN bus |
|---|
| FL1 | EMIF06-MSD02N16 | 6-Line EMI filter&ESD for SD card uQFN16 STMicroelectronics EMIF06-MSD02N16, EMI Filter & ESD Protector |
|---|
| H1,H2 | M3 |
|---|
| J1 | 104031-0811 | microSD 1.10mm SMT push-pull memory card microSD 1.10mm SMT push-pull memory card |
|---|
| J3 | USB_B_Micro | USB Micro Type B connector |
|---|
| J4-J6 | SM04B-ULHK-1TA1-ETB_HF_ | Automotive Connectors 4P ULH Series 0.50 SMT Side Entry Header Key 1 Tin Black |
|---|
| JP1 | BOOT |
|---|
| LED1 | 150060GS75000 | Wurth Elektronik WL-SMCW 520 nm Green LED, 1608 (0603) Clear SMD package |
|---|
| LED2,LED3 | 150060RS75000 | WURTH ELEKTRONIK - 150060RS75000 - LED, 0603, RED, 250MCD, 625NM |
|---|
| R1,R3,R7,R10,R12,R14 | 10k |
|---|
| R2 | 120 |
|---|
| R4 | 5.05 |
|---|
| R5,R6 | 27 |
|---|
| R8 | 60.4k |
|---|
| R9 | 1M |
|---|
| R11,R13 | 68 |
|---|
| R15 | 0 |
|---|
| TP1 | ST_5V | test point |
|---|
| Y1 | ABM3B-8.000MHZ-10-1-U-T | 8 MHz +/-10ppm Crystal 10pF 200 Ohms 4-SMD, No Lead |
|---|