Loading design…
sundevilmotorsports
PCB development repository
| Reference | Value | Description |
|---|---|---|
| IC1 | ESP32-S3-WROOM-1-N8R8 | WiFi Modules - 802.11 (Engineering Samples Only) SMD Module, ESP32-S3R8 with 8 MB Octal PSRAM Die, 8 MB Quad SPI flash, PCB Antenna |
| IC3 | CP2102N-A02-GQFN28 | SILICON LABS - CP2102N-A02-GQFN28 - USB TO UART BRIDGE, -40 TO 85DEG C |
| IC4 | TLP175A_TPL,E | MOSFET Output Optocouplers Trigger LED Current 1mA85dC3750 Vrms |
| IC5 | MIC37100-3.3WS | LDO Voltage Regulators 1.0A Low Voltage uCap LDO Regulator |
| IC6 | TPS2116DRLR | d |
| IC9 | SN74AHC1G125DBVR | Single Bus Buffer Gate with 3-State Output |
| Q1,Q2 |
| Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
|---|
| U2 | SN65HVD230 | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
|---|
| U10 | EMIF06-MSD02N16 | 6-Line EMI filter&ESD for SD card uQFN16 STMicroelectronics EMIF06-MSD02N16, EMI Filter & ESD Protector |
|---|
| C1,C14,C15 | 10uF |
|---|
| C2,C8,C10,C11,C13,C17,C18,C23,C26 | 100nF |
|---|
| C3,C6,C9,C12,C16 | 1uF |
|---|
| C7 | 4.7uF |
|---|
| D1 | ESDCAN03-2BWY | ESD Suppressors / TVS Diodes Automotive dual-line Transil, Transient voltage suppressor (TVS) for CAN bus |
|---|
| H1-H6 | M3 |
|---|
| J1,J2 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | ESP_USB | USB Micro Type B connector |
|---|
| J4,J5,J8 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
|---|
| J6 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
|---|
| J7 | Molex_1040310811 | Micro SD Card Socket with two card detection pins |
|---|
| LED1 | 150060GS75000 | Wurth Elektronik WL-SMCW 520 nm Green LED, 1608 (0603) Clear SMD package |
|---|
| LED2 | 150060RS75000 | WURTH ELEKTRONIK - 150060RS75000 - LED, 0603, RED, 250MCD, 625NM |
|---|
| LED3-LED8 | Amazon LED |
|---|
| R1,R3,R5,R8,R9,R14,R15,R19,R20 | 10k | Resistor |
|---|
| R2 | 5.05 |
|---|
| R12,R13 | 27 |
|---|
| R16 | 22.1K |
|---|
| R17 | 1k |
|---|
| R18 | 47.5K |
|---|
| R21 | 120 |
|---|
| R22,R27,R28,R49,R54 | 220 | Resistor |
|---|
| R25,R42-R47 | 100 | Resistor |
|---|
| R26 | 0 |
|---|
| S1,S2 | MHPS2285V | Pushbutton Switches DPDT 0.1A 30V On-Mom |
|---|
| VR1-VR3 | PCW1J-B24-KEB103L | 10k Ohm 1 Gang Linear Panel Mount Potentiometer None 1.0 Kierros Conductive Plastic 0.75W, 3/4W PC Pins |
|---|
| VR4,VR5 | P091N-2QC20BR10K | Panel Pot, side adjust, 1 gang, 10 kOhms, 50 VAC, Knurled / Slotted 20 mm |
|---|