pcb-practice-project-STM32
tdonca
Following along Phil's Lab STM32 PCB Design: https://youtu.be/aVUqaB0IMh4?si=pQgIZXYOkw8qhJWY
Components (18)
| Reference | Value | Description |
|---|---|---|
| U1 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U2 | STM32F103C8T6 | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| C1-C4,C9 | 100n | Unpolarized capacitor |
| C5 | 10u | Unpolarized capacitor |
| C6 | 10n | Unpolarized capacitor |
| C7,C8 | 1u | Unpolarized capacitor |
| C10,C11 | 10p | Unpolarized capacitor |
| C12,C13 | 22u | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| FB1 | 120R | Ferrite bead |
| J1 | SWD Header | Generic connector, single row, 01x04, script generated |
| J2 | USB_B_Micro | USB Micro Type B connector |
| J3 | UART Header | Generic connector, single row, 01x04, script generated |
| J4 | I2C Header | Generic connector, single row, 01x04, script generated |
| R1 | 10k | Resistor |
| R2-R5 | 1k5 | Resistor |
| SW1 | SW_SPDT | Switch, single pole double throw |
| Y1 | 16MHz | Four pin crystal, GND on pins 2 and 4 |