fanpico
tjko
Fanpico: Open Source Programmable PWM (PC) Fan Controller
Components (48)
| Reference | Value | Description |
|---|---|---|
| U1 | SN74AHCT126 | |
| U2 | AP63301 | 4A, 500kHz Buck DC/DC Converter, adjustable output voltage, TSOT26 |
| U4 | Pico W | |
| U5 | SPX1117-ADJ | 1A Low Dropout regulator, positive, adjustable output, SOT-223 |
| U6 | LM4040DBZ-3 | 3.000V Precision Micropower Shunt Voltage Reference, SOT-23 |
| C1,C3,C4,C6,C24,C26,C29 | 0.1uF 50V | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C2 | 10uF 50V | Polarized capacitor |
| C5 | 10uF 25V | Polarized capacitor, small symbol |
| C7,C8,C30 | 10uF 16V | Polarized capacitor,Polarized capacitor, small symbol |
| C9 | 12pF 50V | Unpolarized capacitor, small symbol |
| C10,C11 | 22uF 25V | Polarized capacitor |
| C23,C25 | 1nF 50V | Unpolarized capacitor |
| D1 | SM5819PL 1A 40V | Schottky diode |
| D2,D4-D6 | LED 0805 (green) | Light emitting diode |
| D3,D28,D31 | ES1D 1A 200V | Diode |
| D7,D13,D14,D16,D17,D23 | 3.3V TVS | Bidirectional transient-voltage-suppression diode |
| D8 | 30V TVS | Bidirectional transient-voltage-suppression diode |
| D21,D22,D26 | 12V TVS | Bidirectional transient-voltage-suppression diode |
| D27,D30 | BAT54(C) | Diode |
| D35,D36 | 5V TVS | Bidirectional transient-voltage-suppression diode |
| F1 | Polyfuse 2A (48V) | Resettable fuse, polymeric positive temperature coefficient |
| F2 | Polyfuse 0.5A | Resettable fuse, polymeric positive temperature coefficient |
| F3 | Polyfuse 1A | Resettable fuse, polymeric positive temperature coefficient |
| G1 | qwiic_Logo | |
| G2 | Logo_Open_Hardware_Small | Open Hardware logo, small |
| H1-H4 | MountingHole_Pad | Mounting Hole with connection |
| J1 | DC Power Input | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | 1-Wire | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | QWIIC | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J13 | Fan1 Output | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J14 | Fan2 Output | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J16 | Sensor1 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J17 | Sensor2 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J19 | Serial Console (TTL) | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP12 | 1-Wire PullUp Enable | Jumper, 2-pole, open |
| L1 | 10uH | Inductor, small symbol |
| R1,R4 | 1k | Resistor |
| R2 | 4.7k | Resistor |
| R3,R48 | 330 | Resistor |
| R5,R7,R40,R43,R50,R51 | 10k | Resistor |
| R6 | 4.99k | Resistor |
| R8 | 422k | Resistor |
| R9 | 30.1k | Resistor |
| R10 | 49.9k | Resistor |
| R41,R44 | 680 | Resistor |
| R49,R55 | 0 | Resistor |
| R54 | DNF | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |