GNSS_geret
xDocka15
Components (45)
| Reference | Value | Description |
|---|---|---|
| U1 | NEO-M9N | GNSS Module NEO M8, VCC 2.7V to 3.6V |
| U2 | TPS613222ADBVR | 1.2A Step-Up Converter, 3.6V Output Voltage, 0.9-5.5V Input Voltage, SOT-23-5 |
| U3 | DFR0654 | ESP32 ESP32-E Transceiver; 802.11 b/g/n/d/e/i/k/r (Wi-Fi, WiFi, WLAN), Bluetooth® Smart 4.x Low Energy (BLE) 2.4GHz ~ 2.5GHz Evaluation Board |
| U4 | HT16k33 | |
| U5-U7 | 7seg_1x1_rgb | |
| U8 | KW4-804AGB | 4 digit 7 segment Green LED, common anode |
| U9 | TCA39306DDFR | |
| U10 | 24C32 | 1Kb (128x8) I2C Serial EEPROM, 1.6-5.5V, SOIC-8 |
| U11 | SN74LV1T34DBVRG4 | Single Power Supply, Single Buffer GATE, CMOS Logic, Level Shifter, SOT-23-5 |
| AE1 | Antenna_Shield | Antenna with extra pin for shielding |
| C1,C4-C6 | 10uF | Polarized capacitor,Unpolarized capacitor |
| C2 | 1uF | Unpolarized capacitor |
| C3 | 10n | Unpolarized capacitor |
| C7-C10 | 100nF | Unpolarized capacitor |
| D2 | B120-E3 | 20V 1A Schottky Barrier Rectifier Diode, SMA(DO-214AC) |
| DS1 | LTC-4724JF | Display Modules - LED Character and Numeric Orange-Yellow 7-Segment 3 Character Common Cathode 2.05V 20mA 0.504" H x 1.182" W x 0.276" D (12.80mm x 30.02mm x 7.00mm) 15-DIP (0.400", 10.16mm), 12 Leads |
| J1 | I2C/BATT_H | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | I2C/BATT_S | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3,J9 | USB_pads | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/),Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | BATT | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | ESP | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | USB_B_Micro | USB Micro Type B connector |
| J12,J13 | ENC+RGB | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 27nH | Inductor |
| L2 | 2.2 uH | Inductor |
| R1 | 0R | Resistor |
| R2 | 10 | Resistor |
| R3-R6,R17-R19 | 4k7 | Resistor |
| RS1 | 200k | Resistor |
| R_E1-R_E3 | 10k | Resistor |
| SW1 | RotaryEncoder_Switch | Rotary encoder, dual channel, incremental quadrate outputs, with switch |
| SW2 | MSN22AFW01 | Switch, dual pole double throw, separate symbols |
| TP1 | SDA | test point |
| TP2 | SCL | test point |
| TP3 | RGB_7seg | test point |
| TP4 | GNSS_TXD | test point |
| TP5 | GNSS_RXD | test point |
| TP6 | +5V | test point |
| TP7 | +3V3 | test point |
| TP8 | DT | test point |
| TP9 | CLK | test point |
| TP10 | Jumper_MOSI | 2-polar test point |
| TP11 | Jumper_D9 | 2-polar test point |
| TP12 | IO22 | test point |
| TP13 | IO21 | test point |