PorpDAQ
ybabs
Design Files for a STM32-Based Underwater Acoustics data acquisition board for harbour porpoises
Components (44)
| Reference | Value | Description |
|---|---|---|
| IC1 | ADP7156ARDZ-3.3-R7 | LDO Voltage Regulators 3.3/5Vin 1.2A Ultra Low Noise LDO Fixed |
| IC2,IC3,IC5 | LT6233CS6#TRMPBF | LT6233 60MHz LP SOT23 op amp Linear Technology LT6233CS6#TRMPBF Operational Amplifier, 55MHz Rail-Rail, 12 V, 5 V, 9 V, 6-Pin TSOT-23 |
| IC6 | AD8031ARTZ-R2 | Operational Amplifiers - Op Amps SOT23 SINGLE LOW POWER OP AMP 2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers |
| Q1 | AO3401A | 30V P-Channel MOSFET |
| U2 | STM32H743VITx | |
| U3 | REF3433IDBVR | |
| U4 | USBLC6-2SC6 | |
| C1,C2,C28,C33,C36,C42 | 10u | |
| C3-C5,C23,C25,C27 | 1u | |
| C10,C12,C30,C32 | 1.5n | |
| C11,C31 | 1.2n | |
| C13 | 4.7u | |
| C14,C16-C18,C20,C21,C24,C26,C34,C35,C37-C41,C50 | 100n | |
| C15,C19 | 2.2u | |
| C22 | 100n X7R | |
| C29 | 47p | |
| C48,C49 | 12p | |
| D2 | LED_Red | |
| D3 | LED | |
| F1 | Polyfuse | |
| FB1 | 600 @ 100MHz | |
| FB2 | 100 @ 100 MHz | |
| FID1-FID3 | Fiducial | |
| J1 | USB_C_Receptacle_USB2.0 | |
| J2 | Conn_Coaxial | |
| J3 | SWDIO | |
| J4 | Micro_SD_Card | |
| J7 | USART | |
| R1,R2 | 5.1k | |
| R3,R5 | 8.87k | |
| R4 | 4.42k | |
| R6,R8 | 620 | |
| R7 | 294 | |
| R9,R11 | 130 | |
| R10 | 1.15k | |
| R12 | 4.99k | |
| R13,R14,R27 | 10k | |
| R17,R19,R22-R24 | 47k | |
| R18 | 0 | |
| R20 | 47 | |
| R21 | 2k2 | |
| R28 | 2.2k | |
| S1 | TL1105CF160Q | Tactile Switches 6X6X8MM 160GF |
| Y1 | 16MHz |