Loading design…
zOnlyKroks
| Reference | Value | Description |
|---|---|---|
| Q1 | FQD16N25CTM | 100% avalanche testedcapability; Low gate charge ( Typ. 41nC); Low Crss ( Typ. 68pF); 16A, 250V, RDS(on) = 270m(Max.) @VGS = 10 V, ID = 8A |
| Q7,Q11,Q13,Q15,Q17,Q19 | MMBTA92 | 0.5A Ic, 300V Vce, PNP High Voltage Transistor, SOT-23 |
| Q8 | SS8050 | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| Q9,Q10,Q12,Q14,Q16,Q18,Q26-Q37 | MMBTA42 | 0.5A Ic, 300V Vce, NPN High Voltage Transistor, SOT-23 |
| U1 | LM3478MM | 2.97~40V Wide Input Range Boost/SEPIC/Flyback DC-DC Controller, VSSOP-8 |
| U2,U5 | 74HC595 | 8-bit serial in/out Shift Register 3-State Outputs |
| U4 | TPS562202 | 2A Synchronous Step-Down Voltage Regulator 580kHz, adjustable output voltage, 4.5-17V Input Voltage, 0.804V-7V Output Voltage, SOT-563 |
| U6 | CH340G | USB serial converter, UART, SOIC-16 |
| U7 | ESP32-WROOM-32E-R2 | RF Module, ESP32-D0WDR2-V3 SoC, with 2MB PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| Br7-Br12 | 33k Ohm | Resistor |
| C1 | EEE-FT1V680AP | PANASONIC - EEE-FT1V680AP - CAPACITOR ALUM ELEC, 68UF, 20%, 35V, SMD, FULL REEL |
| C2,C4,C5,C7,C8,C10,C13-C16,Cbyp1 | 100nF | Unpolarized capacitor, small symbol |
| C3,C9,C11,C12 | 10uF | |
| C6 | 10 uF | Polarized capacitor |
| C17,C59 | 12 pF | Unpolarized capacitor |
| C19 | 15 pF | |
| C23 | 22uF | |
| C24,C26 | 47uF | |
| C79,C80 | 100 nF | Unpolarized capacitor |
| Ccomp1 | 150pF | Unpolarized capacitor, small symbol |
| Ccomp2,Ccomp3 | 1.5nF | Unpolarized capacitor, small symbol |
| Cfilt1 | 10 pF | Unpolarized capacitor, small symbol |
| D1 | STTH506B | STMicroelectronics 600V 5A, Silicon Junction Diode, 3-Pin DPAK STTH506B-TR |
| GND1,VIN1-VIN3 | Conn_01x01 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J1 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | USB_C_Receptacle_USB2.0 | |
| L1 | CYH127-330UH | Fixed Inductors 330uH 10% SMD 1307 |
| L2 | SDR0403-3R3ML | |
| N1-N6 | IN-16 | |
| R27-R38,R43,R44,R47,R48,R51,R52,R55,R56,R59,R60,R63,R64,R67,R68,Rffb1 | 10k Ohm | Resistor, small symbol |
| R39,R40 | 5.1k | |
| R41,R42 | 22 | |
| R49,R54,R58,R62,R66,R70 | 47k Ohm | Resistor, small symbol |
| R50,R53,R57,R61,R65,R69 | 100k | Resistor, small symbol |
| Rcomp1 | 162 kOhm | Resistor, small symbol |
| Rfadj1 | 147 kOhm | Resistor, small symbol |
| Rfb1 | 8.06 kOhm | Resistor, small symbol |
| Rfb2 | 1.2MOhm | Resistor, small symbol |
| Rfbt1 | 30.9 kOhm | Resistor, small symbol |
| RFilt1 | 100 Ohm | Resistor, small symbol |
| RSense1 | 33 mOhm | Resistor, small symbol |
| SS8050 | NPN | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| SW3 | EN | |
| SW4 | CAL | |
| SW5 | BOOT0 | |
| Y3 | 12 MHz | Four pin crystal, GND on pins 2 and 4 |