Loading design…
zeankundev
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
| Reference | Value | Description |
|---|---|---|
| Q1 | DMN3033LDM | 6.9A Id, 30V Vds, N-Channel MOSFET, SOT-23-6 |
| U1 | RP2040 | A microcontroller by Raspberry Pi |
| U2 | W25Q32JVSS | 32Mb Serial Flash Memory, Standard/Dual/Quad SPI, SOIC-8 |
| U3 | AP7384-33Y | 50mA Low Dropout Voltage Regulator, Fixed Output 3.3V, Wide Input Voltage Range 40V, SOT-89-3 |
| C1 | 100u | Polarized capacitor |
| C2,C3 | 15pF | Unpolarized capacitor |
| C4,C5,C7,C9-C14 | 100n | Unpolarized capacitor |
| C6,C8 | 1u | Unpolarized capacitor |
| D1 | SD101BW-7-F | Schottky diode |
| L1 | 1m | Inductor |
| R1 | 100 | Resistor |
| R2,R3 | 1k | Resistor |
| RV1 | R_Potentiometer | Potentiometer |
| TP1 | BOOTSEL | test point |
| TP2 | VIN | test point |
| TP3 | GNDIN | test point |
| TP4 | VOUT | test point |
| TP5 | GNDOUT | test point |
| TP6 | SDA | test point |
| TP7 | SCL | test point |
| TP8 | RUN | test point |
| TP9 | USB_DP | test point |
| TP10 | USB_DM | test point |
| Y1 | 12MHz | Four pin crystal, GND on pins 2 and 4 |