IPRL-Electronics-Hardware
ICRS
Components (36)
| Reference | Value | Description |
|---|---|---|
| IC1,IC2 | ADS1115BQDGSRQ1 | Automotive 16-Bit 860SPS 4-Ch Delta-Sigma ADC With PGA, Oscillator, VREF, Comparator, and I2C |
| IC3 | W25Q16JVUXIQ_TR | NOR Flash spiFlash, 3V, 16M-bit, 4Kb Uniform Sector, DTR |
| IC7-IC10 | ACS712ELCTR-20A-T | Low-noise analog signal path Device bandwidth is set via the new FILTER pin 5 s output rise time in response to step input current 80 kHz bandwidth Total output error 1.5% at TA= 25C Small footprint, low-profile SOIC-8 package 1.2 m internal conductor resistance 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 5.0 V, single supply operation 66 to 185 mV/A output sensitivity Output voltage proportional to AC or DC currents Factory-trimmed for accuracy Extre |
| Q2,Q3 | RQ6E080AJ | 8A Id, 30V Vds, 16.5 mOhm RdsOn, N-Channel Small-Signal MOSFET, TSOT-23-6 |
| Q4 | NTD25P03LT4G | RoHS Compliant |
| U1 | ESP32-S3 | Microcontroller, Wi-Fi 802.11b/g/n, Bluetooth, 32bit |
| U2,U4,U6-U8 | 178.6164.0001 | LITTELFUSE - 178.6164.0001 - FUSE HOLDER, 80V, THROUGH HOLE |
| U3 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U5 | TVS3300DRV | Flat-Clamp Surge Protection Device. 33Vrwm, WSON-6 |
| U9 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C1,C2 | 10p | Unpolarized capacitor |
| C3 | 10n | Unpolarized capacitor |
| C4,C8,C19,C23 | 1u | Unpolarized capacitor |
| C5,C6,C13,C14,C17,C18,C20-C22 | 100n | Unpolarized capacitor |
| C7,C9,C10 | 10u | Unpolarized capacitor |
| C11,C12,C15,C16 | 1n | Unpolarized capacitor |
| D1 | 1N4148WT | Switching Diode 75V 200mA 1V @ 10mA 4ns SOD-523 RoHS |
| D2,D3 | LED | Light emitting diode |
| D4 | SM15T22A | Peak pulse power: 1500 W (10/1000 us) up to 10 kW (8/20 us) Stand-off voltage range from 5 V to 188 V Unidirectional and bidirectional types Low leakage current: 0.2 A at 25 C Operating Tj max: 150 C High power capability at Tj max.: up to 1250 W (10/1000 s) Lead finishing: matte tin plating |
| D6 | MBRA340T3G | Schottky diode |
| D7 | BZV55B10 | 10V, 500mW, 2%, Zener diode, MiniMELF |
| J1-J6,J8,J12 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J9,J15-J18 | YK4420203000G | Barrier Terminal Blocks 950 TB BARRIER |
| J10,J11,J13,J14 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 2n2 | Inductor |
| R1 | 100k | Resistor |
| R2,R3,R5,R6,R12 | 10k | Resistor |
| R4,R7,R8 | 1k | Resistor |
| R9,R10 | 5k | Resistor |
| R11 | 22 | Resistor |
| R17,R19,R21,R23 | 1k69 | Resistor |
| R18,R20,R22,R24 | 4k7 | Resistor |
| S1 | SK12F14G5 | 300mA SPDT 50V 5 Plugin Slide Switches ROHS |
| SW2,SW3 | SW_Push | Push button switch, generic, two pins |
| Y1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |